Full payment upfront. Shipping to Cape Town will be 2 weeks.

Rottler CNC Automatic Vertical Honing Machine 1.9 - 7.38" (48.16 - 187mm) Diameter Honing Range with Optional Hone Heads
• Automatic Lower Crash Protection System – every time cycle start is activated, the machine will check that the stones will not interfere with lower bore before starting rotation and stroking preventing stone and stone holder damage.
• Spindle Taper with Quick Change System - change hone heads in seconds without any wrenches
• Automatic Honing Stone retract at End of Cycle – the machine will automatically retract the stones during last stroke so that the stones do not leave any scratches or marks in the bore.
• Automatic Cross Hatch Angle System – the machine will automatically adjust parameters to programmed cross hatch angle and finish the bore to programmed angle.
• Automatic Roughing and Finishing Load Sensing System - machine controls load/pressure that the honing stones exert against the cylinder wall and reduces load during finishing cycle.
• Automatic Short Stroke and Dwell - machine detects tight area and short stroke or dwells.
• Electronic Hand Wheel for lowering hone head into each bore.
• Automatic Stone Feed-out System - once hone head is positioned in the bore, the machine automatically expands stones and rotates slowly before starting hone cycle
• Automatic Plateau Finish Program - the machine automatically expands plateau stones/brushes to programmed load and counts down number of plateau strokes, then withdraws the stones/brushes and retracts the hone head to the clearance position.
• Control and programming through 15" (400mm) CNC Touch Screen Control
• Precision Display in .0001" (.002mm) resolution
• Industrial PC with Windows Operating System
• WiFi Adapter, USB Flash Drive, Video Camera and Headset
• Remote training, service and support via internet - internet connection to machine required
• Operation in either American or Metric systems
• Horizontal Movement (X Axis) - Left and Right Direction - 38" (965mm) - movement is manually on linear slideways
• Horizontal Movement (Y Axis) - Front and Back Direction - 6" (152mm) - movement is manually on linear slideways
• Vertical Movement (Z Axis) - Up and Down - 19" (483mm) - movement is on linear slideways and is powered by servo motor.
• Stroking System - CNC SERVO Controlled High Pitch Ball Screw System
• Infinitely Variable Stroke Speed Control - Variable from 0 to 1500IPM (38m/min)
• Rapid Stroke System Acceleration - 250in/sec (6.35m/sec)
• Spindle Rotation System - CNC SERVO Controlled High Torque Spindle Rotation System - 44 ft.lbs (60NM)
• Infinitely Variable Spindle RPM Control - Variable from 0 to 400RPM
• (2) Stone Trays for up to 6 stone holder sets with built-in Dial Bore Gage Holder
• Hone Head Storage Rack for up to 5 Hone Heads
• Coolant System - Large Capacity coolant tank 70 Gal (265 Liter) - tank is located under the machine on wheels and rolls out for servicing from front or rear of machine
• Magnetic system for primary filtering inside coolant tank. Magnets are removable for easy tank cleaning once tank is removed from under the machine
• Replaceable Cartridge Canister Filter System. Dual Gradient 50-5 Micron replacement filter cartridge keeps coolant and cabinet clean. Filter Cartridge 514-2-42C
• Machine Cabinet finished in Baked Enamel Powder Coated for easy cleaning and appearance
• Operation, Programming and Spare Parts Manual - Digital
• Paint Color Code: RAL9002 (Grey White)
• Electrical requirements: 208-240V, 25A, 50/60Hz, 3Ph or 1Ph
• Shipping weight 3100 lbs. (1,406 kg)
• Shipping dimensions: 67 X 87 X 90" H (1702 X 2210 X 2286mmH)
• Prices (US Funds) - Freight Terms: EXWORKS, Kent, Washington, USA
• Please indicate on the order if factory tech or sales rep will perform installation.